Gantry Box Beam Welding Production Line Heavy Duty Rail 38KG/m
Quick Details
1. Introduction
This machine is used for the assembly of U-beam&Box-beam. Place the plates on the bracket with auxiliary centering device. Motor drives gantry to travel; and the upper press cylinder and side press cylinder press the plates to finish the assembly and tack welding.
2. Main Parameters
Model | UBZ12 | UBZ15 |
Suitable work-piece size (mm) | 300—1200 | 300—1500 |
Work-piece thickness (mm) | ≦80 | ≦80 |
Max load capacity (t) | 20 | 20 |
Gantry travel speed (m/min) | 4/6 (double speed) | 4/6 (double speed) |
Hydraulic system pressure (MPa) | 16 | 16 |
Max pressure of side cylinder (t) | 15 | 15 |
Max pressure of upper cylinder (t) | 30 | 30 |
Power supply | AC380V, 50HZ, 3P or tailor made | |
Above are our standard models and parameters, and it can be designed and manufactured on request. |
3. Working principle
The machine is mainly used for U-beam and box-beam assembly during production of U- beam/box-beam bay. Work-piece is put on the conveyor with assistant alignment unit. Motor drives gantry into working area. With down-stroke cylinder and side-stroke cylinder on the travel gantry, the web and flange of work-piece are pressed, and spot-welded will be performed on the pressed section. Via travel of gantry, manual spot-weld is carried out along the whole length of work-piece.
4. Main features
The standard models of our U-beam&Box-beam assembly machines have the following features:
5. Reference photo
6. Comparative advantage
Tel : | 86-15251624041 |
---|